您当前位置:全自动不锈钢无塔供水器_组合式不锈钢水箱_组合式保温水箱_河北建光环保设备厂 >> 行业知识 >> 浏览文章
浮球阀进水孔的定位及施工分歧理就会形成它离顶部过近,或许是装置的浮球阀与设备不搭配;
这是因为装置工艺不标准形成了浮球阀离泵管太近,所以会卡住;
浮球阀梗塞或许出水口装反了都市招致不出水;
浮球阀装置地位不当招致从检讨口看不到其任务情形;
因为浮球阀焊接不当,招致进水;
装置时不标准就会招致浮球阀被压扁,从而加大了球阀的行程;
浮球阀衔接杆曲折是因为杆件强度不敷或材质欠好被腐化招致的。
The positioning and construction of the floating ball valve inlet hole will form it too close to the top, perhaps because the device's floating ball valve does not match the equipment;
This is because the device process is not standard to form a floating ball valve is too close to the pump tube, so it will get stuck;
Floating ball valve infarction may be installed in the water outlet contrary to the city can not incur water;
The improper status of the floating ball valve device leads to the inability to see its task situation from the inspection gate;
Because the floating ball valve is not welded properly, it causes water to enter the water;
When the device is not standard, it will cause the floating ball valve to be compressed, thus increasing the stroke of the ball valve;
Floating ball valve connecting rod twists and turns because the strength of the rod is not enough or the material is not good enough to be corrupted.
相关图片
相关文章
|
|
||
|
|
||
|
|
||
|
|